Toyota 2017 Highlander Owners Manual Braking Power Low
- 2017 Toyota Highlander Braking Power Low
- Braking Power Low Toyota Highlander 2017
- Toyota Highlander 2017 Braking Power Low
- 2018 Toyota Highlander Braking Power Low
- 2017 Highlander Braking Power Low
More about Toyota Highlander: On-vehicle inspection 1. INSPECT POWER WINDOW NOTICE: The initial condition that the customizing function is not chosen by the hand-held tester is shown. (a) Check the basic function (Manual operation function). Turn the ignition switch ON. Check that the door glass move up when the power window re. View and Download Toyota HIGHLANDER 2017 quick reference manual online. HIGHLANDER 2017 automobile pdf manual download.
Warning message | Details/actions |
| Indicates that:
Slow the vehicle by applying the brakes. |
| Indicates that the engine was stopped with the shift lever not in p a buzzer also sounds. → Shift the shift lever to p. | |
| Indicates that the engine was stopped while driving a buzzer also sounds. → Stop the vehicle in a safe place such as the shoulder of a road. | |
| Indicates that your vehicle is nearing the vehicle ahead (in vehicle-to-vehicle distance mode) a buzzer also sounds. → Slow the vehicle by applying the brakes. |
| Alerts the driver that the vehicle has deviated from the lane (while the lda [lane departure alert] system is operating) the lane line on the side the vehicle has deviated from flashes. The warning buzzer sounds continuously. → Check around the vehicle and back to inside of the lane lines. |
| Indicates that one or more of the doors is not fully closed the system also indicates which doors are not fully closed. If the vehicle reaches a speed of 3 mph (5 km/ h), flashes and a buzzer → Make sure that all the doors are closed. |
| Indicates that the hood is not fully closed if the vehicle reaches a speed of 3 mph (5 km/ h), flashes and a buzzer sounds to indicate that the hood is not yet fully closed. → Close the hood. |
| Indicates that the back door is not fully closed if the vehicle reaches a speed of 3 mph (5 km/ h), flashes and a buzzer sounds to indicate that the back door is not yet fully closed. → Close the back door. |
| Indicates that the glass hatch is not fully closed if the vehicle reaches a speed of 3 mph (5 km/ h), flashes and a buzzer sounds to indicate that the glass hatch is not yet fully closed. → Close the glass hatch. |
| Indicates a malfunction in the intuitive parking assist-sensor the assist-sensors flash. A buzzer also sounds. → Have the vehicle inspected by your toyota dealer. |
| Indicates that an intuitive parking assist-sensor is dirty or covered with ice a buzzer also sounds. → Clean the sensor. |
| Indicates a malfunction in the eps (electric power steering) system a buzzer also sounds. → Have the vehicle inspected by your toyota dealer. | |
| Indicates that the vehicle is being driven at 3 mph (5 km/h) or more with the parking brake still engaged a buzzer also sounds. → Release the parking brake. | |
| Indicates that the engine coolant temperature is too high a buzzer also sounds. |
| Indicates a malfunction in the vehicle¢¦s charging system. → Immediately stop the vehicle in a safe place and contact your toyota dealer. Continuing to drive the vehicle may be dangerous. |
| Indicates that the radar sensor is dirty or covered with ice a buzzer also sounds. → Clean the sensor. |
| Indicates that the dynamic radar cruise control system is unable to judge vehicle-to-vehicle distance a buzzer also sounds. /garageband-product-key-free-download.html. → Turn off snow mode. If the windshield wipers are on, turn them off or set them to a mode other than high speed wiper operation. |
| Indicates that the lda (lane departure alert) system is suspended (the camera sensor temperature is higher than the operation temperature range) a buzzer also sounds. → Restart the lda after driving for a while. | |
| Indicates that a blind spot monitor sensor or the surrounding area on the bumper is dirty or covered with ice a buzzer also sounds. → Clean the sensor and its surrounding area on the bumper. | |
Indicates a malfunction in:
A buzzer also sounds. → Have the vehicle inspected by your toyota dealer. | |
| Indicates a malfunction in the lda (lane departure alert) system a buzzer also sounds. → Have the vehicle inspected by your toyota dealer | |
| Indicates a malfunction in the pcs (pre-collision system) a buzzer also sounds. → Have the vehicle inspected by your toyota dealer. |
| Indicates a malfunction in the bsm (blind spot monitor) system a buzzer also sounds. → Have the vehicle inspected by your toyota dealer. | |
| Indicates abnormal engine oil pressure a buzzer also sounds. → Immediately stop the vehicle in a safe place and contact your toyota dealer. |
| Indicates that the automatic transmission fluid temperature is too high a buzzer also sounds. → Have the vehicle inspected by your toyota dealer. | |
| Indicates a malfunction in the awd system a buzzer also sounds. → Have the vehicle inspected by your toyota dealer. | |
| Indicates that the lda (lane departure alert) system cannot be used because the vehicle speed is lower than approximately 32 mph (50 km/h) → drive the vehicle at 32 mph (50 km/h) or higher. | |
| Indicates that the engine was stopped while driving a buzzer also sounds. → Operate the steering wheel with more force than usual. | |
| Indicates that the engine switch is turned off or turned to accessory mode and the driver¢¦s door is opened while the lights are turned on a buzzer also sounds. → Turn the lights off. | |
| Indicates that the moon roof or panoramic moon roof is not fully closed (with the engine switch off, and the driver¢¦s door open) a buzzer also sounds. → Close the moon roof or panoramic moon roof. | |
| Indicates that the awd system is not currently functional a buzzer also sounds. → Reduce vehicle speed or stop the vehicle in a safe place until the warnings clear. In this case, do not stop the engine. | |
| Indicates the awd system has overheated → immediately stop the vehicle in a safe place and contact your toyota dealer. | |
| Indicates a malfunction in the brake override system a buzzer also sounds. → Have the vehicle inspected by your toyota dealer. |
| Indicates a malfunction in the automatic high beam system a buzzer also sounds. → Have the vehicle inspected by your toyota dealer. | |
| Indicates that the accelerator and brake pedal are being depressed simultaneously → release the accelerator or brake pedal. |
| Indicates that the washer fluid level is low → add washer fluid. | |
| Indicates that remaining fuel is approximately 2.9 Gal. (10.7 L, 2.4 Imp. Gal.) Or less → refuel the vehicle. | |
| Indicates that the trac (traction control) system has been deactivated → turn the trac on. | |
| Indicates that all maintenance according to the driven distance on the maintenance schedule* should be performed soon. Comes on approximately 4500 miles (7200 km) after the maintenance data has been reset. → If necessary, perform maintenance. | |
| Indicates that all maintenance is required to correspond to the driven distance on the maintenance schedule*. Comes on approximately 5000 miles (8000 km) after the maintenance data has been reset. (The indicator will not work properly unless the maintenance data has been reset.) → Perform the necessary maintenance. Please reset the maintenance data after the maintenance is performed | |
| Indicates that the automatic high beam switch is pressed while the headlights are in low beam. → Turn the high beam on and press the automatic high beam switch again. | |
| Indicates that, since the vsc (vehicle stability control) system was turned off, the pre-collision brake system operation is stopped → turn the vsc on. |
| Indicates that the pcs (pre-collision system) is not currently functional because the grille cover or the sensor is dirty → check the grille cover and the sensor and clean them if they are dirty. |
*: Refer to the separate “scheduled maintenance guide” or “owner’s manual supplement” for the maintenance interval applicable to your vehicle.
Messages displays
The message illustrations used are intended as examples, and may differ from the image that is actually displayed on the multi-information display.
Warning message in dynamic radar cruise control mode (if equipped)
In the following situations, the warning message may not be displayed even if vehicle-to-vehicle distance decreases:
- when your vehicle and the vehicle ahead are traveling at the same speed or the vehicle ahead is traveling more quickly than your vehicle
- when the vehicle ahead is traveling at a very low speed
- immediately after cruise control speed is set
- at the instant the accelerator pedal is depressed
2017 Toyota Highlander Braking Power Low
The lda (lane departure alert) lane departure warning function (if equipped)
In the following situations, a warning message will not be displayed even if a lane line is crossed.
Braking Power Low Toyota Highlander 2017
- When the vehicle speed deviates from the operating range of the lda system functions
- When the lane lines cannot be recognized
Conditions that the tire pressure warning system may not function properly
Warning buzzer
If a warning message is displayed
If a warning message is shown on the multi-information display, stay calm and perform the following actions: Master warning light the master warning light also comes on or flashes in order to ..Have the malfunction repaired immediately. (Vehicles with a smart key system)
After taking the specified steps to correct the suspected problem, check that the warning message and light go off. Interior buzzer Exterior buzzer Warning message Details/acti ..Toyota Highlander 2017 Braking Power Low
More about Toyota Highlander:
2018 Toyota Highlander Braking Power Low
Gcwr, twr and unbraked twr
Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. Gcwr*1 and twr*1 *1: These models meet the tow-vehicle trailering requirement of sae international per sae j2807. *2: The model code is in ..